Ru Lin Peng
Ph.D. from Linköping University. 1992. Title: On Residual Stresses and Fatigue of Laser Hardened Steels.
- Residual stresses
- High temperature coatings
- Stainless steels
GC Chai, N Zhou, S Ciurea, M Andersson and R L Peng: "Local Plasticity Exhaustion in a Very High Cycle Fatigue Regime", Scripta Materialia 66 (2012), pp 769-772.
W Xi, R L Peng, W Wu, N Li, S Wang and S Johansson: "Al2O3 Nanoparticle Reinforced Fe-based Alloys Synthesized by Thermite Reaction", Journal of Materials Science (2012) Vol 47, No 8, pp 3585-3591.
K Yuan, R L Peng, X-H Li and S Johansson: "Influence of Precracked Diffusion Coating of Pt-Modified Aluminide on HCF Fracture Mechanism of IN 792 Nickel-Based Superalloy", Applied Mechanics and Materials, Vol 148-149 (2012) pp 24-29.
J M Zhou, V Bushlya, R L Peng, S Johansson, P Avdovic and J E Stahl (2012): "Identification of Subsurface Deformation in Machining of Inconel 718", Journal of Applied Mechanics and Materials, Vol 117-119, pp 1681-1688.
J M Zhou, V Bushlya, R L Peng, S Johansson and J E Stahl (2011): "Effects of Tool Wear on Subsurface Deformation of Nickel-based Superalloy", Procedia Engineering 19, pp 407-413.
J M Zhou, V Bushlya, R L Peng, S Johansson, P Avdovic and J E Stahl (2011): "On Process Induced Subsurface Deformation of Inconel 718 in Relation to Different Cutting Conditions", Proceedings of the 4th Swedish Production Symposium, 2011, Lund, Sweden, pp 263-270.
N Li, Y D Wang, R Lin Peng, X Sun, P K Liaw, G L Wu, L Wang and H N Cai:"Localized Amorphism after High-Strain-Rate Deformation in TWIP Steel", Acta Materialia 59 (2011), pp 6369-6377.
R Lin Peng, G C Chai, T Stein, T Manns and S Johansson: "Experimental Study of the Micromechanical Behaviour of Duplex Stainless Steel SAF 2507 and the Influence of Nitrogen Content", Materials Science Forum, Vol 681 (2011), pp 516-521.
R Lin Peng, X P Liu, Y D Wang, S Y Zhang, Y F Shen and S Johansson: "In-situ Neutron Diffraction Study of the Deformation Behaviour of Two High-Manganese Austenitic Steels", Materials Science Forum, Vol 681 (2011), pp 474-479.
N Jia, R Lin Peng, Y D Wang and Z Zhao: "Self-consistent modeling of rolling textures in an austenitic-ferritic duplex steel", Materials Science and Engineering A 528 (2011), pp 3615-3624.
X P Liu, R Lin Peng, M Hofmann, S Johansson and Y D Wang: "In-Situ Neutron Diffraction Studies of Micromechanical Behavior in a Friction Stir Welded AA7475-T761", Metallurgical and Materials Transactions A, Vol 42A, January 2011, pp 89-94.
N Li, Y D Wang, R Lin Peng, X Sun, Y Ren, L Wang and H N Cai: "Synchrotron X-ray Diffraction Study of Texture Evolution in 904L Stainless Steel under Dynamic Shock Compression", Metallurgical and Materials Transactions A, Vol 42A, January 2011, pp 81-88.
+46 13 28 11 61
A-building, entrance 13, upper floor.
Campus Valla, Linköping
Division of Engineering Materials
Department of Management and Engineering
Last updated: Tue Jan 14 17:45:15 CET 2014