Hide menu

Program for 15th Scandinavian International Conference on Fluid Power


WEDNESDAY - June 7


Session 1a

"Welcome and Opening Address"
Prof. Petter Krus, Linköping University
Prof. Elin Wihlborg, Vice Head of Department, Linköping University, Sweden

"Fluid Power in Industry 4.0"
Janette Kothe, Bosch Rexroth, Germany

Session 1b

"Challenges and Opportunities in Pump Design"
Prof. Monika Ivantysynova, Purdue University, USA

Session 2

"Analysis of an Unusual Contaminant in a Press Hydraulic System"
John.K. Duchowski, HYDAC FluidCareCenter® GmbH, Germany

"Energy Efficiency Comparison of Electric-Hydraulic Hybrid Work Implements Systems"
Björn Eriksson, Parker Hannifin Corporation, Sweden

"Methods for System Safety Assessment of the Hydraulic System in JAS 39 Gripen"
Henning Carlsson, SAAB AB, Sweden

"Towards Finding the Optimal Bucket Filling Strategy through Simulation",
Reno Filla, Volvo Construction Equipment, Sweden

Session 3

"Experimental Investigation of a Displacement Controlled HydrostaticPump/Motor by Means of Rotating Valve Plate"
Liselott Ericson, Linköping University, Sweden

"Barrel Tipping in Axial Piston Pumps and Motors"
Peter Achten, INNAS BV, Holland

"Modeling and Parametric Identification of a Variable-Displacement Pressure Compensated Pump"
Filipe Spuri, Instituto Tecnológico de Aeronáutica, Brazil

"Displacement Control Strategies of an In-Line Axial-Piston Unit"
Viktor Larsson, Linköping University, Sweden

Session 4

"Innovation Management for the Transition to Digital Fluid Power", 
Luciana Pereira, Federal University of Santa Catarina, Brazil

"Managing the Knowledge Supply Chain of Innovation – Consequences for Firms in the Fluid Power Industry",
Nicolette Lakemond, Linköping University, Sweden

"The Impact of Innovation Ecosystem on Firm Innovation",
Solmaz Filiz Karabag, Linköping University, Sweden

"Reclaiming Hydraulics - The Brand",
Paul Bogatir, Hudiksvalls Hydraulikkluster, Sweden

Session 5

"Cloud-Based System Architecture for Driver Assistance in Mobile Machinery"
Benjamin Beck, Technische Universität Dresden, Germany

"Predictive Dynamic Engine Speed Reduction in Mobile Hydraulic Equipment"
Travis Kent Wiens, University of Saskatchewan, Canada

"A Study on Thermal Behavior of Pump-controlled Actuator"
Tatiana Minav, Aalto University, Finland

"Emission Reduction of Mobile Machines by Hydraulic Hybrid"
Seppo Tikkanen, Tampere University of Technology, Finland


THURSDAY - June 8


Session 6

"Future Trends for Heavy Vehicles"
Dr. Reno Filla, Volvo Construction Equipment, Sweden

"Artemis Digital Displacement Series-Hybrid Transmissions for Rail Applications"
Prof. Win Rampen, Artemis Intelligent Power Limited, UK

Session 7

"IoT for Productivity Improvement in Manufacturing/Grinding"
Jan Nilsson, Wipro Infrastructure Engineering AB, Sweden

"A Hydraulic Hybrid Excavator based on Multi-Chamber Cylinders and Secondary Control"
Kim Heybroek, Volvo Construction Equipment, Sweden

"Real-Time Parameter Setpoint Optimization for Electro-Hydraulic Traction Control Systems"
Addison Alexander, Purdue University, USA

"Water Hammer Induced Cavitation – an Experimental and Numerical Study"
Marcus Jansson, Atlas Copco Rock Drills, Sweden

Session 8

"Hydraulic Infinite Linear Actuator - The Ballistic Gait - Digital Hydro-Mechanical Motion"
Martin Hochwallner, Linköping University, Sweden

"An Zero-Flowrate-Switching (ZFS) Control Method Applied in a Digital HydraulicSystem"
Shuang Peng, Wuhan University of Technology, China

"Study of Energy Losses in Digital Hydraulic Multi-Pressure Actuator"
Mikko Huova, Tampere University of Technology, Finland

"Design and Optimization of a Fast Switching Hydraulic Step-Down Converter for Position and Speed Control"
Victor Juliano De Negri, Federal University of Santa Catarina, Brazil

Session 9

"Sensorless Position Control of Direct Driven Hydraulic Actuators"
Tatiana Minav, Aalto University, Finland

"Decentralized Hydraulics for Micro Excavator"
Shuzhong Zhang, Aalto University, Finland

"Model-based Analysis of Decentralized Fluidic Systems in Machine Tools"
Linart Shabi, Technische Universität Dresden, Germany

" A Global Optimisation of a Switched Inertance Hydraulic System based on Genetic Algorithm"
Min Pan, University of Bath, UK

"Use of LMS Amesim® Model to Predict Behavior Impacts of Typical Failures in an Aircraft Hydraulic Brake System"
Mario Maia Neto, Instituto Tecnológico de Aeronáutica, Brazil

Session 10

"The Lattice Boltzmann Method Used for Fluid Flow Modeling in Hydraulic Components"
Bernhard Manhartsgruber, Johannes Kepler University, Austria

"Modeling and Verification of Accumulators using CFD"
Victor Irizar, Fritz Schur Energy A/S, Denmark

"Analysis of Flow Angles and Flow Velocities in Spool Valves for the Calculation of Steady-State Flow Forces"
Patrik Bordovsky, RWTH Aachen University, Germany

"Non-linear Control of a Piezoelectric Two Stage Servovalve"
Johan Persson, University of Bath, Bath, United Kingdom

"The Hydraulic Infinite Linear Actuator with Multiple Rods"
Magnus Landberg, SAAB AB, Sweden


FRIDAY - June 9


Session 11

"Enhancing safety of Independent Metering Systems for Mobile Machinery by Means of Fault Detection"
Benjamin Beck, Technische Universität Dresden, Germany

"Optimal Control for Hydraulic System with Separate Meter-in and Separate Meter-out"
Gerhard Rath, University of Leoben, Austria

"Simulation Study on a Digital Hydraulic Independent Metering Valve System on an Excavator"
Miikka Ketonen, Tampere University of Technology, Finland

"An Approach to combine an Independent-Metering System with an electro-hydraulic Flow-on-Demand Hybrid-System"
Marco Wydra, Karlsruhe Institute of Technology, Germany

Session 12

"A Hardware-In-The-Loop (HIL) Testbed for Hydraulic Transformers Research"
Sangyoon Lee, University of Minnesota, USA

"An Open-Source Framework for Efficient Co-simulation of Fluid Power Systems"
Robert Braun, Linköping University, Sweden

"Modelling Dynamic Response of Hydraulic Fluid Within Tapered Transmission Lines"
Jeremy William ven der Buhs, University of Saskatchewan, Canada

"System Level Co-simulation of a Control Valve and Hydraulic Cylinder Circuit in a Hydraulic Percussion Unit"
Håkan Andersson, Atlas Copco Construction Tools AB, Sweden

Session 13

"Torque Control of a Hydrostatic Transmission Using Extended Linearisation Techniques"
Robert Prabel, University of Rostock, Germany

"Development of an Innovative Variable Flow-Rate Gerotor Pump for Lubrication Circuit of I.C.E: Designing, Modelling and Testing"
Emma Frosina, University of Naples, Italy

"A Study on a Mathematical Model of Gas in Accumulator using van der Waals Equation"
Kazushi Sanada, Yokohama National University, Japan

"Proportional Solenoid Actuator for Independent Metering Valve of the Next Generation Construction Vehicles " 
So-Nam Yun, Korea Institute of Machinery and Materials, Republic of Korea 

Session 14

"Assessment of Electric Drive for Fuel Pump using Hardware in the Loop Simulation"
Batoul Attar, Institut Clément Ader, INSA, France

"Modeling and Simulation of a Single Engine Aircraft Fuel System"
Nathan Raphael do Nascimento Pinheiro, Instituto Tecnológico de Aeronáutica, Brazil

"Early Insights on FMI based Co-Simulation of Aircraft Vehicles Systems"
Robert Hällquist, SAAB AB, Sweden

 


Page manager: liselott.ericson@liu.se
Last updated: Mon Jun 26 11:30:03 CEST 2017