Göm menyn

Publikationer

Publikationerna är sorterade i kronologisk ordning.

2012

  • Carlsson, M., Steinkellner, S., Gavel, H., Ölvander, J., Utilizing Uncertainty Information in Early Model Validation, AIAA Modeling and Simulation Technologies Conference, Minneapolis, MN, USA, 2012.
  • Carlsson, M., Andersson, H., Gavel, H., Ölvander, J., Methodology for Development and Validation of Multipurpose Simulation Models. Proceedings of the 50th AIAA, Aerospace Sciences Meeting. Nashville, TN, USA, 2012.
  • Johansson, C., Persson, P., Ölvander, J., On the Usage of Reliability Methods in Early Design Phases, PSAM11 & ESREL 2012 Conference, Helsinki, Finland, 2012.
  • Safavi E, Gopinath V, Ölvander J, Gavel H. A Collaborative Tool for Conceptual AircraftSystems Design. In: Guidance, Navigation, and Control and Co-located Conferences: AIAA Modeling and Simulation Technologies Conference. AIAA Modeling and Simulation Technologies Conference 13 - 16 August 2012, Minneapolis, Minnesota. 2012
  • Safavi E, Gopinath V, Ölvander J, GAVEL H. Conceptual Optimization of Aircraft Actuator Systems. In: Recent Advances in Aerospace Actuation Systems and Components, June 13-14, 2012, Toulouse, France. Recent Advances in Aerospace Actuation Systems and Components. 2012.

2011

  • Andersson, H., Carlsson, M., Ölvander, J., Towards Configuration Support for Collaborative Simulator Development: A Product Line Approach in Model Based Systems Engineering, Proceedings of the 20th IEEE International Conference on Collaboration Technologies and Infrastructures, Paris, France, 2011, DOI: 10.1109/WETICE.2011.74
  • Melin, T., Amadori, K., Krus, P., Parametric wing profile description for conceptual design, CEAS The International Conference of the European Aerospace Societies, Venice, Italy, Oct. 2011
  • Lind, I., Andersson, H., Model Based Systems Engineering for Aircraft Systems – How does Modelica Based Tools Fit?, Proceedings of the 8th International Modelica Conference, Dresden, Germany, 2011
  • Andersson, H., Steinkellner, S., Erlandsson, H., Configuration Management of Models for Aircraft Simulation, Proceedings of the 27th International Congress of the Aeronautical Sciences, Nice, France, 2010
  • Amadori, K., Lundström, D., Krus, P., Automated design and fabrication of micro-air vehicles, accepted for publication on Journal of Aerospace Engineering, Proceedings of the Institution of Mechanical Engineers Part G [PIG], DOI: 10.1177/0954410011419612, 2011
  • Ölvander J., Tarkian M., Feng X., Multi-objective Optimization of a family of Industrial Robots, in Multi-objective Evolutionary Optimisation for Product Design and Manufacturing, Wang L., Ng A. H.C., Deb K. (editors), pp. 189-217, Springer 2011.
  • Andersson, A., Holmlid, S., Warell, A., "Exploring the concept of Gist as a mean to find the Current Product Sign", Nordcode2011, Roskilde, Denmark, Sep 2011
  • Tarkian M., Persson J., Ölvander J., Feng X., Multidisciplinary Design Optimization of Modular Industrial Robots, ASME 2011 International Design Engineering Technical Conferences, Washington, DC, USA, August 28 - 31, 2011.
  • Tarkian M., Ölvander J., Feng X., Pettersson M., Product Platform Automation for Optimal Configuration of Industrial Robot Families, International Conference on Engineering Design 2011, Copenhagen Denmark, August 15-18, 2011.
  • Nezhadali, V., Kayani O., Razzaq, H., Tarkian, M., Evaluation of an Automated Design and Optimization Framework for Modular Robots Using a Physical Prototype, International Conference on Engineering Design 2011, Copenhagen Denmark, August 15-18, 2011. 
  • Persson J., Ölvander J., A Modified Complex Algorithm Applied to Robust Design Optimization, 13th AIAA Non-Deterministic Approaches Conference, Denver, USA, April 4-7, 2011.
  • Persson J., Ölvander J., Comparison of Sampling Methods for a Dynamic Pressure Regulator, AIAA Aerospace Sciences Meeting, Orlando Florida, January 3-7, 2011.

2010

  • Gavel H., Ölvander J., A quantified and interactive relationship matrix applied to aircraft fuel system conceptual design, International Review of Aerospace Engineering (IREASE), Vol.3 N.1, pp 9-18, 2010.
  • Feng X., Wäppling D., Andersson H., Ölvander J., Tarkian M., Multi-Objective Optimization in Industrial Robotic Cell Design, ASME Design Automation Conference, Montreal, August 15 –18, 2010
  • Amadori, K., Berry, P., Jouannet, C., "Development of A Subscale Flight Testing Platform For A Generic Future Fighter", ICAS2010, 27th International Congress of The Aeronautical Sciences, Nice, France, Sep. 2010
  • Venkata, R. C. M., Tarkian, M., Jouannet, C., “Model Based Aircraft Control System Design and Simulation”, 27th Congress of International Council of the Aeronautical Sciences, Nice, France, 2010.
  • Andersson, H., Steinkellner, S., Erlandsson, H., Configuration Management of Models for Aircraft Simulation, Proceedings of the 27th International Congress of the Aeronautical Sciences, Nice, France, 2010
  • Steinkellner, S., Andersson, H., Gavel, H., Lind, I., Krus, P., Modeling and Simulation of Saab Gripens Vehicle Systems, Challenges in Processes and Data Uncertainties, Proceedings of the 27th International Congress of the Aeronautical Sciences, Nice, France, 2010
  • Herzog, E., Andersson, H., Hallonquist, J., Experience from Introducing SysML into a Large Project Organisation, 20th Annual INCOSE International Symposium, Chicago, Illinois, USA, 2010
  • Andersson, H., Variability and Configuration Principles for Simulation Models in Product Line Development, Proceedings of the 7th European Systems Engineering Conference, EuSEC 2010, Stockholm, Sweden, 2010
  • Andersson, H., Needs for performance of Large Scale Modeling & Simulation, Presentation on the 4th MODPROD Workshop on Model-Based Product Development, Linköping, Sweden, 2010
  • Edris S, Tarkian M, Ölvander J., Rapid Concept Realization for Conceptual Design of Modular Industrial Robots, NordDesign 2010, Göteborg August 25-28, 2010
  • Amadori, K., Lundström, D., Krus, P., "Evaluation of Automatically Designed Micro Air Vehicles and Flight Testing", AIAA-2010-1022, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, FL, USA, Jan. 2010
  • Jouannet, C., Lundström, D., Amadori, K., Berry, P., "Design and Flight Testing of an ECO-Sport Aircraft", AIAA-2010-1206, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, FL, USA, Jan. 2010
  • Lundström, D., Amadori, K., Krus, P., "Validation of Models for Small Scale Electric Propulsion Systems", AIAA-2010-483, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, FL, USA, Jan. 2010

2009

  • Pettersson M., Ölvander J., Drive Train Optimization for Industrial Robots, IEEE Transactions on Robotics, Vol25, No.6, pp2047-2052, 2009.
  • Ölvander J., Johansson B., Gavel H., A Computerized Optimization Framework for Morphological Matrix Applied to Aircraft Conceptual Design, Computer-Aided Design, vol 41, pp. 187-196, 2009.
  • Tarkian M., Ölvander J., Feng X., Petterson M., Design Automation of Modular Industrial Robots, ASME Design Automation Conference, San Diego, August 30 – September 2, 2009.
  • Andersson, H., Herzog, E., Johansson, G. and Johansson, O., Experience from introducing unified modeling language/systems modeling language at Saab Aerosystems, Systems Engineering, John Wiley & Sons, 2009, DOI: 10.1002/sys.20156
  • Herzog, E., Andersson, H., Initial Experience in Contracts Based Systems Engineering, Proceedings of the 19th Annual International Symposium of INCOSE, Singapore, 2009
  • Steinkellner, S., Andersson, H., Gavel, H., Krus, P., Modeling and simulation of Saab Gripen’s vehicle systems, AIAA Modeling and Simulation Technologies Conference, Chicago, Illinois, USA, 2009
  • Feng X., Holmgren B., Ölvander J., Evaluation and Optimization of Industrial Robot Families using Different Kinematic Measures, ASME Design Automation Conference, San Diego, August 30 – September 2, 2009.
  • Mandl C., Feng X., Ölvander J., Automated Design of an Industrial Robot Family, ASME Design Automation Conference, San Diego, August 30 – September 2, 2009.
  • Ericsson L., Johansson A., Ölvander J., Palmberg J.-O., Prediction and Optimisation of Audible Noise from Fluid Power Machines, The Seventh International Conference on Fluid Power Transmission and Control, Hangzhou, China, Beijing World Publishing Corporation, 2009.
  • Lundström, D., Amadori, K., Krus, P., "Automation of Design and Prototyping of Micro Aerial Vehicle", AIAA-2009-629, 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition, Orlando, FL, USA, Jan. 2009
  • Jouannet, C., Lundström, D., Amadori, K., Berry, P., "Morphing Wing Design, from Study to Flight Test", AIAA-2009-1619, 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition, Orlando, Florida, USA, Jan. 2009

2008

  • Andersson H., Weitman A., Ölvander J., Simulink as a Core Tool in Development of Next Generation Gripen, Nordic MathWorks User Conference 2008, Stockholm, Sweden, 20-21 November 2008,.
  • Gavel H., Ölvander J., Krus P., A quantified relationship matrix aided by optimization and probabilistic design, 26th Congress of the International Council of the Aeronautical Sciences, paper No ICAS-2008-6.2.1, Anchorage, USA, 2008.
  • Amadori, K., Jouannet, C., Krus, P., "Aircraft Conceptual Design Optimization", ICAS2008, 26th International Congress of The Aeronautical Sciences, Anchorage, Alaska, USA, Sep. 2008
  • Lundström, D., Amadori, K., "Raven - A Subscale Radio Controlled Business Jet Demonstrator", ICAS2008, 26th International Congress of The Aeronautical Sciences, Anchorage, Alaska, USA, Sep. 2008
  • Ölvander J., Feng X., Holmgren B., Optimal Kinematics Design of an Industrial Robot Family, ASME Design Automation Conference, New York, August 3-6, 2008.
  • Tarkian M., Ölvander J., Lundén B., Integration of Parametric CAD and Dynamic Models for Industrial Robot Design and Optimization, ASME Design Automation Conference, New York, August 3-6, 2008.
  • Tarkian M., Ölvander J., Berry P., Exploring Parametric CAD-models in Aircraft Conceptual Design, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, April 7-10, 2008.
  • Ericsson L, Ölvander J., On optimal Design of Hydrostatic Machines, The 6th International Conference on Fluid Power (6th IFK), Dresden, Germany, March 31 - April 2 2008.
  • Andersson, H., Balancing the Systems Engineering Methods and Tools, Presentation on the KSSE Kongsberg Systems Engineering Event, Kongsberg, Norway, 2008
  • Johansson, O., Andersson, H., Krus, P., Conceptual Design Using Generic Object Inheritance, Proceedings of the ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE, DETC2008-49123, Brooklyn, New York, USA, 2008
  • Steinkellner, S., Andersson, H., Krus, P., Lind, I., Hosted Simulation for Heterogeneous Aircraft System Development, Proceedings of the 26th International Congress of the Aeronautical Sciences, Anchorage, Alaska, USA, 2008
  • Hallberg, P., Andersson, H., Nåbo, M., Krus, P., Modular sustainable light multi-purpose vehicle, Proceedings of the 3rd European Ele-Drive Transportation Conference - EET-2008, Geneva,  Switzerland, 2008
  • Lundström, D., Amadori, K., Krus, P., "Distributed Framework for Micro Aerial Vehicle Design Automation", AIAA-2008-140, 46th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, USA, Jan. 2008
  • Jouannet, C., Lundström, D., Amadori, K., Berry, P., "Design of a Very Light Jet and a Dynamically Scaled Demonstrator", AIAA-2008-137, 46th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, Jan. 2008
  • Gavel H., Ölvander J., Krus P., Aircraft fuel system synthesis aided by interactive morphology, optimization and probabilistic design, 46th AIAA Aerospace Sciences Meeting and Exhibit, paper No AIAA-2008-0159, Reno USA, 2008.

2007

  • Johansson A., Ölvander J., Palmberg J.O., Experimental Verification of Cross-Angle for Noise Reduction in Hydraulic Piston Pumps, Proc. IMechE, Part I: Journal of Systems and Control Engineering, 221(I3), pp. 321–330, 2007.
  • Ericson, L., Ölvander J., Palmberg, J. O., Flow pulsation reduction for variable displacement motors using cross-angle, in Proceedings of Bath Workshop of Power Transmission and Motion Control 2007, Hadleys Ltd, Essex, UK, pp 103-116, 2007.
  • Feng X., Sander- Tavallaey S., Ölvander J., Cycle-based Robot Drive Train Optimization Utilizing SVD Analysis, ASME Design Automation Conference, Las Vegas, September 4-7, 2007.
  • Johanson B., Ölvander J., Pettersson M., Component Based Modelling and Optimization for Modular Robot Design, in Proceedings of ASME Design Automation Conference, Las Vegas, September 4-7, 2007.
  • Pettersson M., Ölvander J., Adaptive Complex Method for Efficient Design Optimization, in Proceedings of ASME Design Automation Conference, Las Vegas, September 4-7, 2007
  • Petterson M., Ölvander J., Andersson H., Adaptive Performance for Industrial Robotics, in proceedings of IEEE International Symposium on Industrial Electronics, Vigo, Spain, June 4-7, 2007.
  • Amadori, K., Jouannet, C., Krus, P., "A Framework for Aerodynamic and Structural Optimization in Conceptual Design", AIAA-2007-4061, 25th AIAA Applied Aerodynamics Conference, Miami, FL, USA, Jun. 2007
  • Amadori, K., Johansson, B., Krus, P., "Using CAD-Tools and Aerodynamic Codes in a Distributed Conceptual Design Framework", AIAA-2007-964, 45th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, USA, Jan. 2007
  • Gavel H., Ölvander J., Johansson B., Krus P., Aircraft Fuel System Synthesis Aided by Interactive Morphology and Optimization, 45th AIAA Aerospace Sciences Meeting and Exhibit, paper No AIAA-2007-0653, Reno, USA, 2007.

2006

  • Gavel H., Ölvander J., Krus P., Optimal Aircraft Fuel System Design, AIAA Journal of Aircraft, vol 43., No5, pp. 1334-1340, 2006
  • Amadori, K., Jouannet, C., Krus, P., "Use of Panel Code Modeling in a Framework for Aircraft Concept Optimization", AIAA-2006-7084, 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, Virginia, USA, Sep. 2006 
  • Andersson, H., Sundkvist, B.-G., Method and Integrated Tools for Efficient Design of Aircraft Control Systems, Proceedings of the 25th International Congress of the Aeronautical Sciences, Hamburg, Germany, 2006
  • Gavel H., Ölvander J., Johansson B., An Algorithmic Morphology Matrix for Aircraft Fuel System Design, 25th Congress of the International Council of the Aeronautical Sciences, paper No ICAS-2006-9.2.2, Hamburg, Germany, 2006.
  • Ölvander J., Krus P, Optimizing the Optimization – A Method for Comparison of Optimization Algorithms, in proceedings of the 2nd AIAA Multidisciplinary Design Optimization Specialist Conference, Newport, Rhode Island, 1-4 May, 2006.

2005

  • Ölvander J., Robustness Considerations in Multi-Objective Optimal Design, Journal of Engineering Design, vol 16. no. 5, pp. 511-523, 2005.
  • Gavel H., Lantto B., Ellström H., Jareland M., Steinkellner S., Krus P., Andersson J., Strategy for Modelling of Large A/C Fluid Systems, SAE 2004 Transactions Journal of Aerospace, pp 1495-1506, 2005.
  • Petterson M., Andersson J., Krus P., On Optimal Drive Train Design in Industrial Robots, in proceedings of IEEE International Conference on Industrial Technology, Hong Kong, December 14-17, 2005.
  • Petterson M., Andersson J., Krus P., Methods for Discrete Design Optimization, in proceedings of ASME DETC'05, Design Automation Conference, Long Beach, California, September 24-28, 2005. 
  • Gavel H., Krus P., Andersson J., Johansson B., Probabilistic Analysis in the Conceptual Phase of an Aircraft Fuel System, proceedings of the 7th AIAA Non-Deterministic Approaches Forum, Austin, Texas, 18-21 April, 2005.

2004

  • Andersson J. and Krus P., A multi-objective optimization approach to aircraft preliminary design, SAE 2003 Transactions Journal of Aerospace, pp 454-460, 2004.
  • Krus P. and Andersson J., Simulation based optimisation for aircraft systems, SAE 2003 Transactions Journal of Aerospace, pp 461-470, 2004.
  • Zachrison A., Rösth M., Andersson J., Werndin R., Evolve – A Vehicle Based Test Platform for Active Rear Axle Camber and Steering Control, SAE 2003 Transactions Journal of Passenger Cars - Mechanical Systems, pp. 690-696, 2004.
  • Andersson J., Design of Fluid Power Systems Using a Multi-Objective Genetic Algorithm, in Applications of Multi-Objective Evolutionary Algorithms, C. Coello Coello and G. Lamont (Editors), World Scientific series on Advances in Natural Computation, 2004.
  • Andersson J., Sensitivity Analysis in Multi-objective Evolutionary Design, in Recent Advances in Simulated Evolution and Learning, Kay Chen Tan, Meng Hiot Lim, Xin Yao and Lipo Wang (Editors), World Scientific series on Advances in Natural Computation, 2004.
  • Petterson M., Andersson J., Krus P., Feng X., Wäppling D., Industrial Robot Design Optimization in the Conceptual Design Phase, in proceedings of Mechatronics & Robotics 2004, IEEE Industrial Electronics Society, Aachen, Germany, September 13-15, 2004.
  • Krus P., Andersson J., An Information Theoretical Perspective on Design Optimization, in Proceedings of ASME Design Automation Conference, Salt Lake City, USA, September 28 - October 2, 2004.
  • Gavel H., Krus P., Andersson J., Quantification of the Elements in the Relationship Matrix. A conceptual study of Aircraft Fuel System, in Proceedings of 42nd AIAA Aerospace Sciences Meeting and Exhibit, Paper No AIAA-2004-0538, Reno, USA, 2004.

2003 och äldre

  • Grante C, Andersson J., A method for evaluating functional content in mechatronic systems using optimisation, Research in Engineering Design, vol. 14, No. 4, pp 224-235, 2003.
  • Angantyr A., Andersson J., Aidanpaa J.O., Constrained Optimization based on a Multi-objective Evolutionary Algorithm, in Proceedings of The Congress on Evolutionary Computation, Canberra, Australia, December 8-12, 2003
  • Gavel H, Andersson J., Using optimization as a tool in fuel system conceptual design, in proceedings of SAE World Aviation congress, Montreal, Canada, September 8-12, 2003.
  • Andersson J., Krus P., A multi-objective optimization approach to aircraft preliminary design, in Proceedings of SAE World Aviation Congress, Montreal, Canada, September 8-12, 2003.
  • Krus P., Andersson J., Simulation based optimisation for aircraft systems, in Proceedings of SAE World Aviation Congress, Montreal, Canada, September 8-12, 2003.
  • Krus P., Andersson J., Optimizing Optimization for Design Optimization, in Proceedings of ASME Design Automation Conference, Chicago, USA, September 2-6, 2003.
  • Andersson J., Redhe M., Response Surface Methods and Pareto Optimization in Crashworthiness Design, in Proceedings of ASME Design Automation Conference, Chicago, USA, September 2-6, 2003.
  • Andersson J., Palmberg J.-O., The Evolve Project – a Mechatronic project for final year students, in Proceedings of the International Conference in Engineering Design ICED’03, Stockholm, Sweden, August 19-21, 2003.
  • Grante C. Andersson J., Safety considerations in optimisation of design specification content, in Proceedings of the International Conference in Engineering Design ICED’03, Stockholm, Sweden, August 19-21, 2003.
  • Johansson A., Andersson J., Effect of Cross-Angle on Piston Forces and Bending Moments in Axial Piston Pumps, in Proceedings of FLUCOME¿03, Sorrento, Italy, August 25-28, 2003.
  • Andersson J., Application of a Multi-objective Genetic Algorithm to Engineering Design Problems, in Proceedings of the 2nd International conference in Evolutionary Multi-Criteria Optimization, Faro, Portugal, April 8-11, 2003.
  • Zachrison A., Rösth M., Andersson J., Werndin R., Evolve – A Vehicle Based Test Platform for Active Rear Axle Camber and Steering Control, in Proceedings of SAE World Congress, Detroit, USA, March 3-6 2003.
  • Andersson J., Sensitivity analysis in Pareto optimal design, in Proc. of the 4th Asia-Pacific Conference on Simulated Evolution and Learning SEAL 02, Singapore, November 18-22, 2002.
  • Andersson J., Wallace D., Pareto Optimization Using the Struggle Genetic Crowding Algorithm, Engineering Optimization, vol 36, No. 6, pp 623-644, 2002.
  • Johansson A., Andersson J., Palmberg J.-O., Optimal Design of the Cross-Angle for Pulsation Reduction in Variable Displacement Pumps, in Proceedings of Bath Workshop of Power Transmission and Motion Control, University of Bath, UK, September, 2002. (Best Paper Award)
  • Andersson J., Multi-objective Optimization in Engineering Design – Application to Fluid Power Systems, Dissertation, Thesis No. 657, Linköping University, Linköping, Sweden, 2001.
  • Andersson J., Krus P., Metamodel Representations for Robustness Assessment in Multi-objective Optimization, in Proceedings of the International Conference on Engineering Design ICED 01, Glasgow, UK, August 21-23, 2001.
  • Johansson B., Andersson J., Krus P., Thermal Modeling of an Electro-Hydrostatic Actuation System, in Proceeding of Recent Advances in Aerospace Hydraulics, Toulouse, France, June 13-15, 2001.
  • Andersson J., Krus P., Multi-objective Optimization of Mixed Variable Design Problems, in Proceedings of 1st international conference on evolutionary multi-criterion optimization, Zurich March 7-9, 2001.
  • Persson P., Kammerlind P., Bergman B., Andersson J., A Methodology for Multi-Characteristic System Improvement with Active Expert Involvement, Quality and Reliability Engineering International, vol. 16, 2000, pp. 405-416.
  • Andersson J., Krus P., Wallace D., Multi-objective Optimization of Hydraulic Actuation Systems, in Proceedings of ASME Design Automation Conference, Baltimore, September 11-13, 2000.
  • Andersson J., A Survey of Multi-objective Optimization in Engineering Design, Technical Report LiTH-IKP-R-1097, Department of Mechanical Engineering, Linköping University, Linköping, Sweden, 2000.
  • Andersson J., On Engineering Systems Design – A Simulation and Optimization Approach, Licentiate Thesis, Thesis No. 765, Linköping University, Linköping, Sweden, 1999.
  • Andersson J., Krus P., Nilsson K., Storck, K., Modelling and Simulation of Heat Generation in Electro-Hydrostatic Actuation Systems, in Proceedings of the 4:th JHPS International Symposium on Fluid Power, Tokyo, Japan, November 15-17, 1999
  • Andersson J., A Method for System Design - With Application on Electro-Hydrostatic Actuation Systems, in Proceedings of Hydraulikdagar 99, Linköping, Sweden, May 18-19, 1999.
  • Svenson H., Andersson J., Rydberg K.-E., Modelling of Losses and Temperature Calculations in Fluid Power Systems, in Proceedings of the Sixth Scandinavian International Conference on Fluid Power, Tampere, Finland, May 26-28, 1999.
  • Nilsson K., Andersson J., Krus P., Method for Integrated Systems Design – A Study of EHA Systems, in Proceedings of Recent Advances in Aerospace Hydraulics, Toulouse, France, November 24-25, 1998.
  • Andersson J., Pohl J., Krus P., Design of Objective Functions for Optimization of Multidomain Systems, in Proceedings of the ASME Annual Winter meeting, Anaheim, USA, November 15-20, 1998.
  • Andersson J., Pohl J., Eppinger S. D., A Design Process Modeling Approach Incorporating Nonlinear Elements, in Proceedings of the ASME Design Theory and Methodology Conference, Atlanta, September 13-16, 1998.
  • Andersson J., Krus P., Nilsson K., Optimization as a Support for Selection and Design of Aircraft Actuation Systems, in Proceedings of the Seventh AIAA/USAF/NASA/ ISSMO Symposium on Multidisciplinary Analysis and Optimization, St. Louis, USA, September 2-4, 1998.
  • Andersson J., Pohl J., Krus P., Design of Multi-Domain Systems Using Optimization, in Proceedings of NordDesign 98, Stockholm, Sweden, August 26-28, 1998.
  • Andersson J., Backlund G., Cronemyr P., Pohl J., Sveder P., Öhtwall Rönnbäck A., Product Development at Saab AB – A Study of Engineering Management, Design Theory Methodology and Simulation and Digital Prototyping, Technical Report LiTH-IKP-R-1033, Department of Mechanical Engineering, Linköping University, Linköping, Sweden, 1998.

 


Sidansvarig: peter.hallberg@liu.se
Senast uppdaterad: 2013-02-18